cfgs

BepInEx/config/com.matsix.cloudsix.cfg

@@ -0,0 +1,206 @@
+## Settings file was created by plugin CloudSix v2.0.0
+## Plugin GUID: com.matsix.cloudsix
+
+[Cloud Horizon]
+
+## Horizon fade height
+# Setting type: Single
+# Default value: 0.4
+# Acceptable value range: From 0 to 1
+Horizon Fade = 0.4
+
+[Cloud Lighting]
+
+## Beer-Lambert extinction
+# Setting type: Single
+# Default value: 10
+# Acceptable value range: From 0.1 to 20
+Extinction = 10
+
+## Density scale for light march
+# Setting type: Single
+# Default value: 0.05
+# Acceptable value range: From 0.01 to 1
+Light March Density = 0.05
+
+## Silver lining strength
+# Setting type: Single
+# Default value: 0.6
+# Acceptable value range: From 0 to 0.99
+Forward Scatter = 0.6
+
+## Back-lit scatter
+# Setting type: Single
+# Default value: 0.3
+# Acceptable value range: From 0 to 0.99
+Back Scatter = 0.3
+
+## Forward vs back blend
+# Setting type: Single
+# Default value: 0.5
+# Acceptable value range: From 0 to 1
+Scatter Blend = 0.5
+
+## Dark edge powder effect
+# Setting type: Single
+# Default value: 0.7
+# Acceptable value range: From 0 to 3
+Powder Effect = 0.7
+
+## Fill light in shadows
+# Setting type: Single
+# Default value: 0.3
+# Acceptable value range: From 0 to 1
+Ambient Strength = 0.3
+
+## Fake bounce light
+# Setting type: Single
+# Default value: 15
+# Acceptable value range: From 0 to 15
+Multi-Scatter = 15
+
+[Cloud Shape]
+
+## Density multiplier for opacity
+# Setting type: Single
+# Default value: 15
+# Acceptable value range: From 1 to 100
+Density Multiplier = 15
+
+## Per-cloud top height variation
+# Setting type: Single
+# Default value: 0
+# Acceptable value range: From 0 to 5
+Height Variation = 0
+
+## Horizontal noise tiling
+# Setting type: Single
+# Default value: 0.1
+# Acceptable value range: From 0.1 to 5
+Noise Tiling XZ = 0.1
+
+## Vertical noise tiling
+# Setting type: Single
+# Default value: 0.33
+# Acceptable value range: From 0.05 to 2
+Noise Tiling Y = 0.33
+
+## 3D detail noise tiling
+# Setting type: Single
+# Default value: 2.5
+# Acceptable value range: From 1 to 20
+Detail Tiling = 2.5
+
+## Detail erosion on cloud tops
+# Setting type: Single
+# Default value: 0.75
+# Acceptable value range: From 0 to 1
+Detail Erosion Top = 0.75
+
+## Worley FBM erosion strength
+# Setting type: Single
+# Default value: 0
+# Acceptable value range: From 0 to 1
+Worley Erosion = 0
+
+## Detail erosion on cloud bases
+# Setting type: Single
+# Default value: 0.35
+# Acceptable value range: From 0 to 1
+Detail Erosion Bottom = 0.35
+
+## Dome mesh scale
+# Setting type: Single
+# Default value: 50
+# Acceptable value range: From 1 to 1000
+Dome Scale = 50
+
+## Dome Y Position
+# Setting type: Single
+# Default value: -150
+# Acceptable value range: From -1000 to 1000
+Dome Position Y = -150
+
+## Curl noise strength for extra detail
+# Setting type: Single
+# Default value: 0.03
+# Acceptable value range: From 0 to 1
+Curl Strength = 0.03
+
+## Curl noise tiling
+# Setting type: Single
+# Default value: 0.6
+# Acceptable value range: From 0.1 to 5
+Curl Tiling = 0.6
+
+[High Clouds]
+
+## Altitude of high cloud layer
+# Setting type: Single
+# Default value: 5000
+# Acceptable value range: From 0.5 to 5000
+Height = 5000
+
+## High cloud coverage amount
+# Setting type: Single
+# Default value: 1
+# Acceptable value range: From 0 to 1
+Coverage = 1
+
+## High cloud opacity
+# Setting type: Single
+# Default value: 0.08
+# Acceptable value range: From 0 to 1
+Opacity = 0.08
+
+## High cloud noise scale
+# Setting type: Single
+# Default value: 0.27
+# Acceptable value range: From 0.1 to 5
+Tiling = 0.27
+
+## Wispy streak stretch amount (lower = more streaky)
+# Setting type: Single
+# Default value: 0.15
+# Acceptable value range: From 0.05 to 1
+Stretch = 0.15
+
+[Internal]
+
+## Do not modify
+# Setting type: String
+# Default value: 
+ConfigVersion = 2.0.0
+
+[Performance]
+
+## Ray march steps for clouds (higher = better quality, worse performance)
+# Setting type: Int32
+# Default value: 64
+# Acceptable value range: From 1 to 64
+Primary Steps = 64
+
+## Steps for light marching through clouds
+# Setting type: Int32
+# Default value: 16
+# Acceptable value range: From 1 to 16
+Light Steps = 16
+
+## Full = best quality, Half = best performance
+# Setting type: CloudResolution
+# Default value: Half
+# Acceptable values: Full, ThreeQuarter, Half
+Cloud Resolution = Half
+
+## Extra primary steps added on top of base (up to 256 total)
+# Setting type: Int32
+# Default value: 0
+# Acceptable value range: From 0 to 192
+Bonus Primary Steps = 0
+
+## Extra light steps added on top of base (up to 32 total)
+# Setting type: Int32
+# Default value: 0
+# Acceptable value range: From 0 to 16
+Bonus Light Steps = 0
+