bepinex init

BepInEx/config/BepInEx.cfg

@@ -0,0 +1,151 @@
+[Caching]
+
+## Enable/disable assembly metadata cache
+## Enabling this will speed up discovery of plugins and patchers by caching the metadata of all types BepInEx discovers.
+# Setting type: Boolean
+# Default value: true
+EnableAssemblyCache = true
+
+[Chainloader]
+
+## If enabled, hides BepInEx Manager GameObject from Unity.
+## This can fix loading issues in some games that attempt to prevent BepInEx from being loaded.
+## Use this only if you know what this option means, as it can affect functionality of some older plugins.
+## 
+# Setting type: Boolean
+# Default value: false
+HideManagerGameObject = false
+
+[Harmony.Logger]
+
+## Specifies which Harmony log channels to listen to.
+## NOTE: IL channel dumps the whole patch methods, use only when needed!
+# Setting type: LogChannel
+# Default value: Warn, Error
+# Acceptable values: None, Info, IL, Warn, Error, Debug, All
+# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
+LogChannels = Warn, Error
+
+[Logging]
+
+## Enables showing unity log messages in the BepInEx logging system.
+# Setting type: Boolean
+# Default value: true
+UnityLogListening = true
+
+## If enabled, writes Standard Output messages to Unity log
+## NOTE: By default, Unity does so automatically. Only use this option if no console messages are visible in Unity log
+## 
+# Setting type: Boolean
+# Default value: false
+LogConsoleToUnityLog = false
+
+[Logging.Console]
+
+## Enables showing a console for log output.
+# Setting type: Boolean
+# Default value: false
+Enabled = false
+
+## If enabled, will prevent closing the console (either by deleting the close button or in other platform-specific way).
+# Setting type: Boolean
+# Default value: false
+PreventClose = false
+
+## If true, console is set to the Shift-JIS encoding, otherwise UTF-8 encoding.
+# Setting type: Boolean
+# Default value: false
+ShiftJisEncoding = false
+
+## Hints console manager on what handle to assign as StandardOut. Possible values:
+## Auto - lets BepInEx decide how to redirect console output
+## ConsoleOut - prefer redirecting to console output; if possible, closes original standard output
+## StandardOut - prefer redirecting to standard output; if possible, closes console out
+## 
+# Setting type: ConsoleOutRedirectType
+# Default value: Auto
+# Acceptable values: Auto, ConsoleOut, StandardOut
+StandardOutType = Auto
+
+## Which log levels to show in the console output.
+# Setting type: LogLevel
+# Default value: Fatal, Error, Warning, Message, Info
+# Acceptable values: None, Fatal, Error, Warning, Message, Info, Debug, All
+# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
+LogLevels = Fatal, Error, Warning, Message, Info
+
+[Logging.Disk]
+
+## Include unity log messages in log file output.
+# Setting type: Boolean
+# Default value: false
+WriteUnityLog = false
+
+## Appends to the log file instead of overwriting, on game startup.
+# Setting type: Boolean
+# Default value: false
+AppendLog = false
+
+## Enables writing log messages to disk.
+# Setting type: Boolean
+# Default value: true
+Enabled = true
+
+## Which log leves are saved to the disk log output.
+# Setting type: LogLevel
+# Default value: Fatal, Error, Warning, Message, Info
+# Acceptable values: None, Fatal, Error, Warning, Message, Info, Debug, All
+# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
+LogLevels = Fatal, Error, Warning, Message, Info
+
+[Preloader]
+
+## Enables or disables runtime patches.
+## This should always be true, unless you cannot start the game due to a Harmony related issue (such as running .NET Standard runtime) or you know what you're doing.
+# Setting type: Boolean
+# Default value: true
+ApplyRuntimePatches = true
+
+## Specifies which MonoMod backend to use for Harmony patches. Auto uses the best available backend.
+## This setting should only be used for development purposes (e.g. debugging in dnSpy). Other code might override this setting.
+# Setting type: MonoModBackend
+# Default value: auto
+# Acceptable values: auto, dynamicmethod, methodbuilder, cecil
+HarmonyBackend = auto
+
+## If enabled, BepInEx will save patched assemblies into BepInEx/DumpedAssemblies.
+## This can be used by developers to inspect and debug preloader patchers.
+# Setting type: Boolean
+# Default value: false
+DumpAssemblies = false
+
+## If enabled, BepInEx will load patched assemblies from BepInEx/DumpedAssemblies instead of memory.
+## This can be used to be able to load patched assemblies into debuggers like dnSpy.
+## If set to true, will override DumpAssemblies.
+# Setting type: Boolean
+# Default value: false
+LoadDumpedAssemblies = false
+
+## If enabled, BepInEx will call Debugger.Break() once before loading patched assemblies.
+## This can be used with debuggers like dnSpy to install breakpoints into patched assemblies before they are loaded.
+# Setting type: Boolean
+# Default value: false
+BreakBeforeLoadAssemblies = false
+
+[Preloader.Entrypoint]
+
+## The local filename of the assembly to target.
+# Setting type: String
+# Default value: UnityEngine.CoreModule.dll
+Assembly = UnityEngine.CoreModule.dll
+
+## The name of the type in the entrypoint assembly to search for the entrypoint method.
+# Setting type: String
+# Default value: Application
+Type = Application
+
+## The name of the method in the specified entrypoint assembly and type to hook and load Chainloader from.
+# Setting type: String
+# Default value: .cctor
+Method = .cctor
+

BepInEx/config/com.bepis.bepinex.configurationmanager.cfg

@@ -0,0 +1,39 @@
+## Settings file was created by plugin Configuration Manager v18.0.1
+## Plugin GUID: com.bepis.bepinex.configurationmanager
+
+[]
+
+Show config manager = F12
+
+[Filtering]
+
+# Setting type: Boolean
+# Default value: false
+Show advanced = false
+
+# Setting type: Boolean
+# Default value: true
+Show keybinds = true
+
+# Setting type: Boolean
+# Default value: true
+Show settings = true
+
+[General]
+
+## The shortcut used to toggle the config manager window on and off.
+## The key can be overridden by a game-specific plugin if necessary, in that case this setting is ignored.
+# Setting type: KeyboardShortcut
+# Default value: F1
+Show config manager = F12
+
+## Show section title for plugins with only one section
+# Setting type: Boolean
+# Default value: false
+Hide single sections = false
+
+## If set to true plugins will be collapsed when opening the configuration manager window
+# Setting type: Boolean
+# Default value: true
+Plugin collapsed default = true
+

BepInEx/plugins/spt/ConfigurationManager.xml

@@ -0,0 +1,216 @@
+<?xml version="1.0"?>
+<doc>
+    <assembly>
+        <name>ConfigurationManager</name>
+    </assembly>
+    <members>
+        <member name="M:ConfigurationManager.SettingSearcher.GetBepInExCoreConfig">
+            <summary>
+            Get entries for all core BepInEx settings
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.SettingSearcher.GetPluginConfig(BepInEx.BaseUnityPlugin)">
+            <summary>
+            Get entries for all settings of a plugin
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.Utilities.Utils.FindPlugins">
+            <summary>
+            Search for all instances of BaseUnityPlugin loaded by chainloader or other means.
+            </summary>
+        </member>
+        <member name="T:ConfigurationManager.ConfigurationManager">
+            <summary>
+            An easy way to let user configure how a plugin behaves without the need to make your own GUI. The user can change any of the settings you expose, even keyboard shortcuts.
+            https://github.com/ManlyMarco/BepInEx.ConfigurationManager
+            </summary>
+        </member>
+        <member name="F:ConfigurationManager.ConfigurationManager.GUID">
+            <summary>
+            GUID of this plugin
+            </summary>
+        </member>
+        <member name="F:ConfigurationManager.ConfigurationManager.Version">
+            <summary>
+            Version constant
+            </summary>
+        </member>
+        <member name="E:ConfigurationManager.ConfigurationManager.DisplayingWindowChanged">
+            <summary>
+            Event fired every time the manager window is shown or hidden.
+            </summary>
+        </member>
+        <member name="F:ConfigurationManager.ConfigurationManager.OverrideHotkey">
+            <summary>
+            Disable the hotkey check used by config manager. If enabled you have to set <see cref="P:ConfigurationManager.ConfigurationManager.DisplayingWindow"/> to show the manager.
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.ConfigurationManager.#ctor">
+            <inheritdoc />
+        </member>
+        <member name="P:ConfigurationManager.ConfigurationManager.DisplayingWindow">
+            <summary>
+            Is the config manager main window displayed on screen
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.ConfigurationManager.RegisterCustomSettingDrawer(System.Type,System.Action{ConfigurationManager.SettingEntryBase})">
+            <summary>
+            Register a custom setting drawer for a given type. The action is ran in OnGui in a single setting slot.
+            Do not use any Begin / End layout methods, and avoid raising height from standard.
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.ConfigurationManager.BuildSettingList">
+            <summary>
+            Rebuild the setting list. Use to update the config manager window if config settings were removed or added while it was open.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.ConfigurationManager.SearchString">
+            <summary>
+            String currently entered into the search box
+            </summary>
+        </member>
+        <member name="T:ConfigurationManager.SettingEntryBase">
+            <summary>
+            Class representing all data about a setting collected by ConfigurationManager.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.AcceptableValues">
+            <summary>
+            List of values this setting can take
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.AcceptableValueRange">
+            <summary>
+            Range of the values this setting can take
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.ShowRangeAsPercent">
+            <summary>
+            Should the setting be shown as a percentage (only applies to value range settings)
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.CustomDrawer">
+            <summary>
+            Custom setting draw action.
+            Use either CustomDrawer or CustomHotkeyDrawer, using both at the same time leads to undefined behaviour.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.CustomHotkeyDrawer">
+            <summary>
+            Custom setting draw action that allows polling keyboard input with the Input class.
+            Use either CustomDrawer or CustomHotkeyDrawer, using both at the same time leads to undefined behaviour.
+            </summary>
+        </member>
+        <member name="T:ConfigurationManager.SettingEntryBase.CustomHotkeyDrawerFunc">
+            <summary>
+            Custom setting draw action that allows polling keyboard input with the Input class.
+            </summary>
+            <param name="setting">Setting currently being set, is available</param>
+            <param name="isCurrentlyAcceptingInput">Set this ref parameter to true when you want the current setting drawer to receive Input events. Remember to set it to false after you are done!</param>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.Browsable">
+            <summary>
+            Show this setting in the settings screen at all? If false, don't show.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.Category">
+            <summary>
+            Category the setting is under. Null to be directly under the plugin.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.DefaultValue">
+            <summary>
+            If set, a "Default" button will be shown next to the setting to allow resetting to default.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.HideDefaultButton">
+            <summary>
+            Force the "Reset" button to not be displayed, even if a valid DefaultValue is available. 
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.HideSettingName">
+            <summary>
+            Force the setting name to not be displayed. Should only be used with a <see cref="P:ConfigurationManager.SettingEntryBase.CustomDrawer"/> to get more space.
+            Can be used together with <see cref="P:ConfigurationManager.SettingEntryBase.HideDefaultButton"/> to gain even more space.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.Description">
+            <summary>
+            Optional description shown when hovering over the setting
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.DispName">
+            <summary>
+            Name of the setting
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.PluginInfo">
+            <summary>
+            Plugin this setting belongs to
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.ReadOnly">
+            <summary>
+            Only allow showing of the value. False whenever possible by default.
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.SettingType">
+            <summary>
+            Type of the variable
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.PluginInstance">
+            <summary>
+            Instance of the plugin that owns this setting
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.IsAdvanced">
+            <summary>
+            Is this setting advanced
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.Order">
+            <summary>
+            Order of the setting on the settings list relative to other settings in a category. 0 by default, lower is higher on the list.
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.SettingEntryBase.Get">
+            <summary>
+            Get the value of this setting
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.SettingEntryBase.Set(System.Object)">
+            <summary>
+            Set the value of this setting
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.SettingEntryBase.SetValue(System.Object)">
+            <summary>
+            Implementation of <see cref="M:ConfigurationManager.SettingEntryBase.Set(System.Object)"/>
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.ObjToStr">
+            <summary>
+            Custom converter from setting type to string for the textbox
+            </summary>
+        </member>
+        <member name="P:ConfigurationManager.SettingEntryBase.StrToObj">
+            <summary>
+            Custom converter from string to setting type for the textbox
+            </summary>
+        </member>
+        <member name="T:ConfigurationManager.ValueChangedEventArgs`1">
+            <summary>
+            Arguments representing a change in value
+            </summary>
+        </member>
+        <member name="M:ConfigurationManager.ValueChangedEventArgs`1.#ctor(`0)">
+            <inheritdoc />
+        </member>
+        <member name="P:ConfigurationManager.ValueChangedEventArgs`1.NewValue">
+            <summary>
+            Newly assigned value
+            </summary>
+        </member>
+    </members>
+</doc>