601 lines
25 KiB
INI
601 lines
25 KiB
INI
## Settings file was created by plugin Borkel's Realistic NVGs v2.1.1
|
|
## Plugin GUID: com.borkel.nvgmasks
|
|
|
|
[00. Miscellaneous]
|
|
|
|
## Sprinting will toggle tactical devices until you stop sprinting, this mitigates the IR lights being visible outside of the NVGs. I recommend enabling this feature.
|
|
# Setting type: Boolean
|
|
# Default value: false
|
|
Sprint toggles tactical devices. DO NOT USE WITH FIKA. = false
|
|
|
|
## Enables debug logging.
|
|
# Setting type: Boolean
|
|
# Default value: false
|
|
Enable Debug Logging = false
|
|
|
|
[01. Global]
|
|
|
|
## Applies size multiplier to all masks
|
|
# Setting type: Single
|
|
# Default value: 1.07
|
|
# Acceptable value range: From 0 to 2
|
|
1. Mask size multiplier = 1.07
|
|
|
|
## Applies gain multiplier to all NVGs
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0 to 5
|
|
2. Gain multiplier = 1
|
|
|
|
## Toggles whether night vision affects ambient lighting.
|
|
# Setting type: Boolean
|
|
# Default value: true
|
|
3. Allow ambient change = true
|
|
|
|
## Toggles lens distortion for all NVGs.
|
|
# Setting type: Boolean
|
|
# Default value: true
|
|
4. Enable lens distortion = true
|
|
|
|
## Toggles near blur for all NVGs.
|
|
# Setting type: Boolean
|
|
# Default value: true
|
|
5. Enable near blur = true
|
|
|
|
## Increases intensity of blur.
|
|
# Setting type: Single
|
|
# Default value: 20
|
|
# Acceptable value range: From 0 to 100
|
|
6. Near blur intensity = 20
|
|
|
|
## Distance at which the blur disappears.
|
|
# Setting type: Single
|
|
# Default value: 4
|
|
# Acceptable value range: From 0 to 20
|
|
7. Near blur distance = 4
|
|
|
|
## Changes the size of the gauss kernel, affecting quality.
|
|
# Setting type: Int32
|
|
# Default value: 4
|
|
# Acceptable value range: From 1 to 4
|
|
8. Near blur quality = 4
|
|
|
|
[02. Gating]
|
|
|
|
## Increases the gain by 1 step. There's 5 levels (-2...2), default level is the third level (0).
|
|
# Setting type: KeyCode
|
|
# Default value: None
|
|
# Acceptable values: None, Backspace, Tab, Clear, Return, Pause, Escape, Space, Exclaim, DoubleQuote, Hash, Dollar, Percent, Ampersand, Quote, LeftParen, RightParen, Asterisk, Plus, Comma, Minus, Period, Slash, Alpha0, Alpha1, Alpha2, Alpha3, Alpha4, Alpha5, Alpha6, Alpha7, Alpha8, Alpha9, Colon, Semicolon, Less, Equals, Greater, Question, At, LeftBracket, Backslash, RightBracket, Caret, Underscore, BackQuote, A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, LeftCurlyBracket, Pipe, RightCurlyBracket, Tilde, Delete, Keypad0, Keypad1, Keypad2, Keypad3, Keypad4, Keypad5, Keypad6, Keypad7, Keypad8, Keypad9, KeypadPeriod, KeypadDivide, KeypadMultiply, KeypadMinus, KeypadPlus, KeypadEnter, KeypadEquals, UpArrow, DownArrow, RightArrow, LeftArrow, Insert, Home, End, PageUp, PageDown, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, Numlock, CapsLock, ScrollLock, RightShift, LeftShift, RightControl, LeftControl, RightAlt, LeftAlt, RightMeta, RightCommand, RightApple, LeftMeta, LeftCommand, LeftApple, LeftWindows, RightWindows, AltGr, Help, Print, SysReq, Break, Menu, Mouse0, Mouse1, Mouse2, Mouse3, Mouse4, Mouse5, Mouse6, JoystickButton0, JoystickButton1, JoystickButton2, JoystickButton3, JoystickButton4, JoystickButton5, JoystickButton6, JoystickButton7, JoystickButton8, JoystickButton9, JoystickButton10, JoystickButton11, JoystickButton12, JoystickButton13, JoystickButton14, JoystickButton15, JoystickButton16, JoystickButton17, JoystickButton18, JoystickButton19, Joystick1Button0, Joystick1Button1, Joystick1Button2, Joystick1Button3, Joystick1Button4, Joystick1Button5, Joystick1Button6, Joystick1Button7, Joystick1Button8, Joystick1Button9, Joystick1Button10, Joystick1Button11, Joystick1Button12, Joystick1Button13, Joystick1Button14, Joystick1Button15, Joystick1Button16, Joystick1Button17, Joystick1Button18, Joystick1Button19, Joystick2Button0, Joystick2Button1, Joystick2Button2, Joystick2Button3, Joystick2Button4, Joystick2Button5, Joystick2Button6, Joystick2Button7, Joystick2Button8, Joystick2Button9, Joystick2Button10, Joystick2Button11, Joystick2Button12, Joystick2Button13, Joystick2Button14, Joystick2Button15, Joystick2Button16, Joystick2Button17, Joystick2Button18, Joystick2Button19, Joystick3Button0, Joystick3Button1, Joystick3Button2, Joystick3Button3, Joystick3Button4, Joystick3Button5, Joystick3Button6, Joystick3Button7, Joystick3Button8, Joystick3Button9, Joystick3Button10, Joystick3Button11, Joystick3Button12, Joystick3Button13, Joystick3Button14, Joystick3Button15, Joystick3Button16, Joystick3Button17, Joystick3Button18, Joystick3Button19, Joystick4Button0, Joystick4Button1, Joystick4Button2, Joystick4Button3, Joystick4Button4, Joystick4Button5, Joystick4Button6, Joystick4Button7, Joystick4Button8, Joystick4Button9, Joystick4Button10, Joystick4Button11, Joystick4Button12, Joystick4Button13, Joystick4Button14, Joystick4Button15, Joystick4Button16, Joystick4Button17, Joystick4Button18, Joystick4Button19, Joystick5Button0, Joystick5Button1, Joystick5Button2, Joystick5Button3, Joystick5Button4, Joystick5Button5, Joystick5Button6, Joystick5Button7, Joystick5Button8, Joystick5Button9, Joystick5Button10, Joystick5Button11, Joystick5Button12, Joystick5Button13, Joystick5Button14, Joystick5Button15, Joystick5Button16, Joystick5Button17, Joystick5Button18, Joystick5Button19, Joystick6Button0, Joystick6Button1, Joystick6Button2, Joystick6Button3, Joystick6Button4, Joystick6Button5, Joystick6Button6, Joystick6Button7, Joystick6Button8, Joystick6Button9, Joystick6Button10, Joystick6Button11, Joystick6Button12, Joystick6Button13, Joystick6Button14, Joystick6Button15, Joystick6Button16, Joystick6Button17, Joystick6Button18, Joystick6Button19, Joystick7Button0, Joystick7Button1, Joystick7Button2, Joystick7Button3, Joystick7Button4, Joystick7Button5, Joystick7Button6, Joystick7Button7, Joystick7Button8, Joystick7Button9, Joystick7Button10, Joystick7Button11, Joystick7Button12, Joystick7Button13, Joystick7Button14, Joystick7Button15, Joystick7Button16, Joystick7Button17, Joystick7Button18, Joystick7Button19, Joystick8Button0, Joystick8Button1, Joystick8Button2, Joystick8Button3, Joystick8Button4, Joystick8Button5, Joystick8Button6, Joystick8Button7, Joystick8Button8, Joystick8Button9, Joystick8Button10, Joystick8Button11, Joystick8Button12, Joystick8Button13, Joystick8Button14, Joystick8Button15, Joystick8Button16, Joystick8Button17, Joystick8Button18, Joystick8Button19
|
|
1. Manual gating increase = None
|
|
|
|
## Decreases the gain by 1 step. There's 5 levels (-2...2), default level is the third level (0).
|
|
# Setting type: KeyCode
|
|
# Default value: None
|
|
# Acceptable values: None, Backspace, Tab, Clear, Return, Pause, Escape, Space, Exclaim, DoubleQuote, Hash, Dollar, Percent, Ampersand, Quote, LeftParen, RightParen, Asterisk, Plus, Comma, Minus, Period, Slash, Alpha0, Alpha1, Alpha2, Alpha3, Alpha4, Alpha5, Alpha6, Alpha7, Alpha8, Alpha9, Colon, Semicolon, Less, Equals, Greater, Question, At, LeftBracket, Backslash, RightBracket, Caret, Underscore, BackQuote, A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, LeftCurlyBracket, Pipe, RightCurlyBracket, Tilde, Delete, Keypad0, Keypad1, Keypad2, Keypad3, Keypad4, Keypad5, Keypad6, Keypad7, Keypad8, Keypad9, KeypadPeriod, KeypadDivide, KeypadMultiply, KeypadMinus, KeypadPlus, KeypadEnter, KeypadEquals, UpArrow, DownArrow, RightArrow, LeftArrow, Insert, Home, End, PageUp, PageDown, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, Numlock, CapsLock, ScrollLock, RightShift, LeftShift, RightControl, LeftControl, RightAlt, LeftAlt, RightMeta, RightCommand, RightApple, LeftMeta, LeftCommand, LeftApple, LeftWindows, RightWindows, AltGr, Help, Print, SysReq, Break, Menu, Mouse0, Mouse1, Mouse2, Mouse3, Mouse4, Mouse5, Mouse6, JoystickButton0, JoystickButton1, JoystickButton2, JoystickButton3, JoystickButton4, JoystickButton5, JoystickButton6, JoystickButton7, JoystickButton8, JoystickButton9, JoystickButton10, JoystickButton11, JoystickButton12, JoystickButton13, JoystickButton14, JoystickButton15, JoystickButton16, JoystickButton17, JoystickButton18, JoystickButton19, Joystick1Button0, Joystick1Button1, Joystick1Button2, Joystick1Button3, Joystick1Button4, Joystick1Button5, Joystick1Button6, Joystick1Button7, Joystick1Button8, Joystick1Button9, Joystick1Button10, Joystick1Button11, Joystick1Button12, Joystick1Button13, Joystick1Button14, Joystick1Button15, Joystick1Button16, Joystick1Button17, Joystick1Button18, Joystick1Button19, Joystick2Button0, Joystick2Button1, Joystick2Button2, Joystick2Button3, Joystick2Button4, Joystick2Button5, Joystick2Button6, Joystick2Button7, Joystick2Button8, Joystick2Button9, Joystick2Button10, Joystick2Button11, Joystick2Button12, Joystick2Button13, Joystick2Button14, Joystick2Button15, Joystick2Button16, Joystick2Button17, Joystick2Button18, Joystick2Button19, Joystick3Button0, Joystick3Button1, Joystick3Button2, Joystick3Button3, Joystick3Button4, Joystick3Button5, Joystick3Button6, Joystick3Button7, Joystick3Button8, Joystick3Button9, Joystick3Button10, Joystick3Button11, Joystick3Button12, Joystick3Button13, Joystick3Button14, Joystick3Button15, Joystick3Button16, Joystick3Button17, Joystick3Button18, Joystick3Button19, Joystick4Button0, Joystick4Button1, Joystick4Button2, Joystick4Button3, Joystick4Button4, Joystick4Button5, Joystick4Button6, Joystick4Button7, Joystick4Button8, Joystick4Button9, Joystick4Button10, Joystick4Button11, Joystick4Button12, Joystick4Button13, Joystick4Button14, Joystick4Button15, Joystick4Button16, Joystick4Button17, Joystick4Button18, Joystick4Button19, Joystick5Button0, Joystick5Button1, Joystick5Button2, Joystick5Button3, Joystick5Button4, Joystick5Button5, Joystick5Button6, Joystick5Button7, Joystick5Button8, Joystick5Button9, Joystick5Button10, Joystick5Button11, Joystick5Button12, Joystick5Button13, Joystick5Button14, Joystick5Button15, Joystick5Button16, Joystick5Button17, Joystick5Button18, Joystick5Button19, Joystick6Button0, Joystick6Button1, Joystick6Button2, Joystick6Button3, Joystick6Button4, Joystick6Button5, Joystick6Button6, Joystick6Button7, Joystick6Button8, Joystick6Button9, Joystick6Button10, Joystick6Button11, Joystick6Button12, Joystick6Button13, Joystick6Button14, Joystick6Button15, Joystick6Button16, Joystick6Button17, Joystick6Button18, Joystick6Button19, Joystick7Button0, Joystick7Button1, Joystick7Button2, Joystick7Button3, Joystick7Button4, Joystick7Button5, Joystick7Button6, Joystick7Button7, Joystick7Button8, Joystick7Button9, Joystick7Button10, Joystick7Button11, Joystick7Button12, Joystick7Button13, Joystick7Button14, Joystick7Button15, Joystick7Button16, Joystick7Button17, Joystick7Button18, Joystick7Button19, Joystick8Button0, Joystick8Button1, Joystick8Button2, Joystick8Button3, Joystick8Button4, Joystick8Button5, Joystick8Button6, Joystick8Button7, Joystick8Button8, Joystick8Button9, Joystick8Button10, Joystick8Button11, Joystick8Button12, Joystick8Button13, Joystick8Button14, Joystick8Button15, Joystick8Button16, Joystick8Button17, Joystick8Button18, Joystick8Button19
|
|
2. Manual gating decrease = None
|
|
|
|
## Will reset when the game opens. You are supposed to use the gating increase/decrease keys to change the gating level, but you are free to change it manually if you want to make sure you are at a specific gating level.
|
|
# Setting type: Int32
|
|
# Default value: 0
|
|
3. Gating level = 0
|
|
|
|
## EXPERIMENTAL! WILL REDUCE FPS! Enables auto-gating (automatic brightness adjustment) for certain night vision devices. Auto-gating WILL NOT work without this enabled.
|
|
# Setting type: Boolean
|
|
# Default value: false
|
|
4. Enable Auto-Gating = false
|
|
|
|
## Clamps the minimum brightness multiplier to the night vision device's minimum brightness multiplier. If disabled, night vision can become fully dark during automatic fire.
|
|
# Setting type: Boolean
|
|
# Default value: true
|
|
5. Clamp Minimum Gating Multiplier = true
|
|
|
|
## DEV SETTING!!! Enables the debug overlay for auto-gating
|
|
# Setting type: Boolean
|
|
# Default value: false
|
|
6. Enable Auto-Gating Debug Overlay = false
|
|
|
|
[03. Illumination]
|
|
|
|
## Brightness multiplier for IR flashlights
|
|
# Setting type: Single
|
|
# Default value: 1.5
|
|
# Acceptable value range: From 0 to 5
|
|
IR flashlight brightness multiplier = 1.5
|
|
|
|
## Range multiplier for IR flashlights
|
|
# Setting type: Single
|
|
# Default value: 2
|
|
# Acceptable value range: From 0 to 10
|
|
IR flashlight range multiplier = 2
|
|
|
|
## Brightness multiplier for IR lasers
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0 to 10
|
|
IR laser brightness multiplier = 1
|
|
|
|
## Range multiplier for IR lasers
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0 to 10
|
|
IR laser range multiplier = 1
|
|
|
|
## Point size multiplier for IR lasers
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0 to 10
|
|
IR laser point close size multiplier = 1
|
|
|
|
## Point size multiplier for IR lasers
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0 to 10
|
|
IR laser point far size multiplier = 1
|
|
|
|
[GPNVG-18]
|
|
|
|
## Light amplification
|
|
# Setting type: Single
|
|
# Default value: 2.5
|
|
# Acceptable value range: From 0 to 5
|
|
1. Gain = 2.5
|
|
|
|
## Controls the intensity of the noise overlay.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
# Acceptable value range: From 0 to 1
|
|
2. Noise Intensity = 0.2
|
|
|
|
## Controls the scale of the noise pattern.
|
|
# Setting type: Single
|
|
# Default value: 0.1
|
|
# Acceptable value range: From 0.01 to 0.99
|
|
3. Noise Scale = 0.1
|
|
|
|
## Adjusts the size of the NVG mask.
|
|
# Setting type: Single
|
|
# Default value: 0.96
|
|
# Acceptable value range: From 0.01 to 2
|
|
4. Mask Size = 0.96
|
|
|
|
## Adjusts the red color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 152
|
|
# Acceptable value range: From 0 to 255
|
|
5. Red = 152
|
|
|
|
## Adjusts the green color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 214
|
|
# Acceptable value range: From 0 to 255
|
|
6. Green = 214
|
|
|
|
## Adjusts the blue color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 252
|
|
# Acceptable value range: From 0 to 255
|
|
7. Blue = 252
|
|
|
|
## Enables automatic brightness adjustment for this device. Only used if the global setting is enabled. Off will disable any automatic brightness adjustment. AutoGain will make brightness adjust to ambient light only. AutoGating will also make brightness react to gunshots.
|
|
# Setting type: EGatingType
|
|
# Default value: AutoGating
|
|
# Acceptable values: Off, AutoGain, AutoGating
|
|
8. Adjustment Type = AutoGating
|
|
|
|
## Changes the rate at which brightness adjusts.
|
|
# Setting type: Single
|
|
# Default value: 0.3
|
|
9. Adjustment Speed = 0.3
|
|
|
|
## Changes the maximum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
10. Max Brightness Multiplier = 1
|
|
|
|
## Changes the minimum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
11. Min Brightness Multiplier = 0.2
|
|
|
|
## Changes the minimum brightness level for auto-gating
|
|
# Setting type: Single
|
|
# Default value: 0
|
|
12. Min Brightness Threshold = 0
|
|
|
|
## Changes the maximum brightness level for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.15
|
|
13. Max Brightness Threshold = 0.15
|
|
|
|
## Adjusts the amount of distortion around the lens.
|
|
# Setting type: Single
|
|
# Default value: 0.02
|
|
# Acceptable value range: From 0 to 1
|
|
14. Edge Distortion = 0.02
|
|
|
|
## Adjusts the starting point of the distortion.
|
|
# Setting type: Single
|
|
# Default value: 0.04
|
|
# Acceptable value range: From 0 to 1
|
|
15. Edge Distortion Start = 0.04
|
|
|
|
[N-15]
|
|
|
|
## Light amplification
|
|
# Setting type: Single
|
|
# Default value: 2.1
|
|
# Acceptable value range: From 0 to 5
|
|
1. Gain = 2.1
|
|
|
|
## Controls the intensity of the noise overlay.
|
|
# Setting type: Single
|
|
# Default value: 0.25
|
|
# Acceptable value range: From 0 to 1
|
|
2. Noise Intensity = 0.25
|
|
|
|
## Controls the scale of the noise pattern.
|
|
# Setting type: Single
|
|
# Default value: 0.15
|
|
# Acceptable value range: From 0.01 to 0.99
|
|
3. Noise Scale = 0.15
|
|
|
|
## Adjusts the size of the NVG mask.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0.01 to 2
|
|
4. Mask Size = 1
|
|
|
|
## Adjusts the red color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 60
|
|
# Acceptable value range: From 0 to 255
|
|
5. Red = 60
|
|
|
|
## Adjusts the green color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 235
|
|
# Acceptable value range: From 0 to 255
|
|
6. Green = 235
|
|
|
|
## Adjusts the blue color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 100
|
|
# Acceptable value range: From 0 to 255
|
|
7. Blue = 100
|
|
|
|
## Enables automatic brightness adjustment for this device. Only used if the global setting is enabled. Off will disable any automatic brightness adjustment. AutoGain will make brightness adjust to ambient light only. AutoGating will also make brightness react to gunshots.
|
|
# Setting type: EGatingType
|
|
# Default value: AutoGain
|
|
# Acceptable values: Off, AutoGain, AutoGating
|
|
8. Adjustment Type = AutoGain
|
|
|
|
## Changes the rate at which brightness adjusts.
|
|
# Setting type: Single
|
|
# Default value: 0.3
|
|
9. Adjustment Speed = 0.3
|
|
|
|
## Changes the maximum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
10. Max Brightness Multiplier = 1
|
|
|
|
## Changes the minimum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
11. Min Brightness Multiplier = 0.2
|
|
|
|
## Changes the minimum brightness level for auto-gating
|
|
# Setting type: Single
|
|
# Default value: 0
|
|
12. Min Brightness Threshold = 0
|
|
|
|
## Changes the maximum brightness level for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.15
|
|
13. Max Brightness Threshold = 0.15
|
|
|
|
## Adjusts the amount of distortion around the lens.
|
|
# Setting type: Single
|
|
# Default value: 0.1
|
|
# Acceptable value range: From 0 to 1
|
|
14. Edge Distortion = 0.1
|
|
|
|
## Adjusts the starting point of the distortion.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
# Acceptable value range: From 0 to 1
|
|
15. Edge Distortion Start = 0.2
|
|
|
|
[PNV-10T]
|
|
|
|
## Light amplification
|
|
# Setting type: Single
|
|
# Default value: 1.6
|
|
# Acceptable value range: From 0 to 5
|
|
1. Gain = 1.6
|
|
|
|
## Controls the intensity of the noise overlay.
|
|
# Setting type: Single
|
|
# Default value: 0.3
|
|
# Acceptable value range: From 0 to 1
|
|
2. Noise Intensity = 0.3
|
|
|
|
## Controls the scale of the noise pattern.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
# Acceptable value range: From 0.01 to 0.99
|
|
3. Noise Scale = 0.2
|
|
|
|
## Adjusts the size of the NVG mask.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0.01 to 2
|
|
4. Mask Size = 1
|
|
|
|
## Adjusts the red color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 60
|
|
# Acceptable value range: From 0 to 255
|
|
5. Red = 60
|
|
|
|
## Adjusts the green color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 210
|
|
# Acceptable value range: From 0 to 255
|
|
6. Green = 210
|
|
|
|
## Adjusts the blue color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 60
|
|
# Acceptable value range: From 0 to 255
|
|
7. Blue = 60
|
|
|
|
## Enables automatic brightness adjustment for this device. Only used if the global setting is enabled. Off will disable any automatic brightness adjustment. AutoGain will make brightness adjust to ambient light only. AutoGating will also make brightness react to gunshots.
|
|
# Setting type: EGatingType
|
|
# Default value: Off
|
|
# Acceptable values: Off, AutoGain, AutoGating
|
|
8. Adjustment Type = Off
|
|
|
|
## Changes the rate at which brightness adjusts.
|
|
# Setting type: Single
|
|
# Default value: 0.3
|
|
9. Adjustment Speed = 0.3
|
|
|
|
## Changes the maximum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
10. Max Brightness Multiplier = 1
|
|
|
|
## Changes the minimum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
11. Min Brightness Multiplier = 0.2
|
|
|
|
## Changes the minimum brightness level for auto-gating
|
|
# Setting type: Single
|
|
# Default value: 0
|
|
12. Min Brightness Threshold = 0
|
|
|
|
## Changes the maximum brightness level for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.15
|
|
13. Max Brightness Threshold = 0.15
|
|
|
|
## Adjusts the amount of distortion around the lens.
|
|
# Setting type: Single
|
|
# Default value: 0.15
|
|
# Acceptable value range: From 0 to 1
|
|
14. Edge Distortion = 0.15
|
|
|
|
## Adjusts the starting point of the distortion.
|
|
# Setting type: Single
|
|
# Default value: 0.3
|
|
# Acceptable value range: From 0 to 1
|
|
15. Edge Distortion Start = 0.3
|
|
|
|
[PNV-57E]
|
|
|
|
## Light amplification
|
|
# Setting type: Single
|
|
# Default value: 1.2
|
|
# Acceptable value range: From 0 to 5
|
|
1. Gain = 1.2
|
|
|
|
## Controls the intensity of the noise overlay.
|
|
# Setting type: Single
|
|
# Default value: 0.35
|
|
# Acceptable value range: From 0 to 1
|
|
2. Noise Intensity = 0.35
|
|
|
|
## Controls the scale of the noise pattern.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
# Acceptable value range: From 0.01 to 0.99
|
|
3. Noise Scale = 0.2
|
|
|
|
## Adjusts the size of the NVG mask.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0.01 to 2
|
|
4. Mask Size = 1
|
|
|
|
## Adjusts the red color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 80
|
|
# Acceptable value range: From 0 to 255
|
|
5. Red = 80
|
|
|
|
## Adjusts the green color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 215
|
|
# Acceptable value range: From 0 to 255
|
|
6. Green = 215
|
|
|
|
## Adjusts the blue color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 60
|
|
# Acceptable value range: From 0 to 255
|
|
7. Blue = 60
|
|
|
|
## Enables automatic brightness adjustment for this device. Only used if the global setting is enabled. Off will disable any automatic brightness adjustment. AutoGain will make brightness adjust to ambient light only. AutoGating will also make brightness react to gunshots.
|
|
# Setting type: EGatingType
|
|
# Default value: Off
|
|
# Acceptable values: Off, AutoGain, AutoGating
|
|
8. Adjustment Type = Off
|
|
|
|
## Changes the rate at which brightness adjusts.
|
|
# Setting type: Single
|
|
# Default value: 0.3
|
|
9. Adjustment Speed = 0.3
|
|
|
|
## Changes the maximum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
10. Max Brightness Multiplier = 1
|
|
|
|
## Changes the minimum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
11. Min Brightness Multiplier = 0.2
|
|
|
|
## Changes the minimum brightness level for auto-gating
|
|
# Setting type: Single
|
|
# Default value: 0
|
|
12. Min Brightness Threshold = 0
|
|
|
|
## Changes the maximum brightness level for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.15
|
|
13. Max Brightness Threshold = 0.15
|
|
|
|
## Adjusts the amount of distortion around the lens.
|
|
# Setting type: Single
|
|
# Default value: 0.55
|
|
# Acceptable value range: From 0 to 1
|
|
14. Edge Distortion = 0.55
|
|
|
|
## Adjusts the starting point of the distortion.
|
|
# Setting type: Single
|
|
# Default value: 0.5
|
|
# Acceptable value range: From 0 to 1
|
|
15. Edge Distortion Start = 0.5
|
|
|
|
[PVS-14]
|
|
|
|
## Light amplification
|
|
# Setting type: Single
|
|
# Default value: 2.4
|
|
# Acceptable value range: From 0 to 5
|
|
1. Gain = 2.4
|
|
|
|
## Controls the intensity of the noise overlay.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
# Acceptable value range: From 0 to 1
|
|
2. Noise Intensity = 0.2
|
|
|
|
## Controls the scale of the noise pattern.
|
|
# Setting type: Single
|
|
# Default value: 0.1
|
|
# Acceptable value range: From 0.01 to 0.99
|
|
3. Noise Scale = 0.1
|
|
|
|
## Adjusts the size of the NVG mask.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
# Acceptable value range: From 0.01 to 2
|
|
4. Mask Size = 1
|
|
|
|
## Adjusts the red color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 95
|
|
# Acceptable value range: From 0 to 255
|
|
5. Red = 95
|
|
|
|
## Adjusts the green color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 210
|
|
# Acceptable value range: From 0 to 255
|
|
6. Green = 210
|
|
|
|
## Adjusts the blue color component of the NVG tint.
|
|
# Setting type: Single
|
|
# Default value: 255
|
|
# Acceptable value range: From 0 to 255
|
|
7. Blue = 255
|
|
|
|
## Enables automatic brightness adjustment for this device. Only used if the global setting is enabled. Off will disable any automatic brightness adjustment. AutoGain will make brightness adjust to ambient light only. AutoGating will also make brightness react to gunshots.
|
|
# Setting type: EGatingType
|
|
# Default value: AutoGating
|
|
# Acceptable values: Off, AutoGain, AutoGating
|
|
8. Adjustment Type = AutoGating
|
|
|
|
## Changes the rate at which brightness adjusts.
|
|
# Setting type: Single
|
|
# Default value: 0.3
|
|
9. Adjustment Speed = 0.3
|
|
|
|
## Changes the maximum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 1
|
|
10. Max Brightness Multiplier = 1
|
|
|
|
## Changes the minimum brightness multiplier for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.2
|
|
11. Min Brightness Multiplier = 0.2
|
|
|
|
## Changes the minimum brightness level for auto-gating
|
|
# Setting type: Single
|
|
# Default value: 0
|
|
12. Min Brightness Threshold = 0
|
|
|
|
## Changes the maximum brightness level for auto-gating.
|
|
# Setting type: Single
|
|
# Default value: 0.15
|
|
13. Max Brightness Threshold = 0.15
|
|
|
|
## Adjusts the amount of distortion around the lens.
|
|
# Setting type: Single
|
|
# Default value: 0.02
|
|
# Acceptable value range: From 0 to 1
|
|
14. Edge Distortion = 0.02
|
|
|
|
## Adjusts the starting point of the distortion.
|
|
# Setting type: Single
|
|
# Default value: 0.04
|
|
# Acceptable value range: From 0 to 1
|
|
15. Edge Distortion Start = 0.04
|
|
|
|
[T-7 Thermal]
|
|
|
|
## Enables FPS limiter for this device
|
|
# Setting type: Boolean
|
|
# Default value: true
|
|
1. Enable FPS Stuck = true
|
|
|
|
## Minimum FPS for this device
|
|
# Setting type: Int32
|
|
# Default value: 60
|
|
2. Minimum FPS = 60
|
|
|
|
## Maximum FPS for this device
|
|
# Setting type: Int32
|
|
# Default value: 60
|
|
3. Maximum FPS = 60
|
|
|
|
## Sets whether the device's vision should be pixelated
|
|
# Setting type: Boolean
|
|
# Default value: true
|
|
4. Pixelated = true
|
|
|
|
## Sets whether the device's vision should be noisy
|
|
# Setting type: Boolean
|
|
# Default value: false
|
|
5. Noisy = false
|
|
|
|
## Sets whether the device's vision should have motion blur
|
|
# Setting type: Boolean
|
|
# Default value: false
|
|
6. Motion Blurred = false
|
|
|