## Settings file was created by plugin LootingBots v1.7.0
## Plugin GUID: me.skwizzy.lootingbots

[Loot Finder]

## Enables corpse looting for the selected bot types. Takes effect next raid
# Setting type: BotType
# Default value: Scav, Pmc, PlayerScav, Raider
# Acceptable values: None, Scav, Pmc, PlayerScav, Raider, Cultist, Boss, Follower, Bloodhound, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Enable corpse looting = Scav, Pmc, PlayerScav, Raider

## When scanning for loot, corpses will be ignored if they are not visible for the selected bot types. Takes effect next raid
# Setting type: BotType
# Default value: None
# Acceptable values: None, Scav, Pmc, PlayerScav, Raider, Cultist, Boss, Follower, Bloodhound, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Enable corpse line of sight check = None

## Distance (in meters) a bot is able to detect a corpse
# Setting type: Single
# Default value: 80
Detect corpse distance = 80

## Enables container looting for the selected bot types. Takes effect next raid
# Setting type: BotType
# Default value: Scav, Pmc, PlayerScav, Raider
# Acceptable values: None, Scav, Pmc, PlayerScav, Raider, Cultist, Boss, Follower, Bloodhound, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Enable container looting = Scav, Pmc, PlayerScav, Raider

## When scanning for loot, containers will be ignored if they are not visible for the selected bot types. Takes effect next raid
# Setting type: BotType
# Default value: None
# Acceptable values: None, Scav, Pmc, PlayerScav, Raider, Cultist, Boss, Follower, Bloodhound, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Enable container line of sight check = None

## Distance (in meters) a bot is able to detect a container
# Setting type: Single
# Default value: 80
Detect container distance = 80

## Enables loose item looting for the selected bot types. Takes effect next raid
# Setting type: BotType
# Default value: Scav, Pmc, PlayerScav, Raider
# Acceptable values: None, Scav, Pmc, PlayerScav, Raider, Cultist, Boss, Follower, Bloodhound, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Enable loose item looting = Scav, Pmc, PlayerScav, Raider

## When scanning for loot, loose items will be ignored if they are not visible for the selected bot types. Takes effect next raid
# Setting type: BotType
# Default value: None
# Acceptable values: None, Scav, Pmc, PlayerScav, Raider, Cultist, Boss, Follower, Bloodhound, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Enable item line of sight check = None

## Distance (in meters) a bot is able to detect an item
# Setting type: Single
# Default value: 80
Detect item distance = 80

## Enable different levels of log messages to show in the logs
# Setting type: LogLevel
# Default value: Error
# Acceptable values: None, Error, Warning, Info, Debug, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Debug: Log Levels = Error

## Enable different levels of log messages specific to the mod interop methods
# Setting type: LogLevel
# Default value: Error
# Acceptable values: None, Error, Warning, Info, Debug, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Debug: Interop Log Levels = Error

## Filters new log entries only showing logs for the number of the bot specified. A value of 0 denotes no filter
# Setting type: Int32
# Default value: 0
Debug: Filter logs on bot = 0

## Renders shperes where bots are trying to navigate when container looting. (Red): Container position. (Black): 'Optimized' container position. (Green): Calculated bot destination. (Blue): NavMesh corrected destination (where the bot will move).
# Setting type: Boolean
# Default value: false
Debug: Show navigation points = false

[Loot Finder (Timing)]

## Amount of seconds a bot will wait to start their first loot scan after spawning into raid.
# Setting type: Single
# Default value: 6
Delay after spawn = 6

## The amount of seconds the bot will wait until triggering another loot scan
# Setting type: Single
# Default value: 15
Loot scan interval = 15

## Amount of milliseconds a bot will wait after taking an item into their inventory before attempting to loot another item. Simulates the amount of time it takes for a player to look through loot decide to take something.
# Setting type: Double
# Default value: 3000
Delay after taking item (ms) = 3000

## Adds a delay before looting an item to simulate the time it takes for a bot to "uncover (examine)" an item when searching containers, items and corpses. The delay is calculated using the ExamineTime of an object and the AttentionExamineTime of the bot.
# Setting type: Boolean
# Default value: true
Enable examine time = true

[Loot Settings]

## When enabled, bots will always try to close a container after they have finished looting. If the bot is inturrupted while looting, the container may remain open.
# Setting type: Boolean
# Default value: true
Bots always close containers = true

## Bots will query more accurate ragfair prices to do item value checks. Will make a query to get ragfair prices when the client is first started
# Setting type: Boolean
# Default value: false
Use flea market prices = false

## Calculate weapon value by looking up each attachment. More accurate than just looking at the base weapon template but a slightly more expensive check
# Setting type: Boolean
# Default value: true
Calculate weapon value from attachments = true

## Allows bots to take the attachments off of a weapon if they cannot pick it up, or if they discard a previously owned weapon
# Setting type: Boolean
# Default value: true
Allow weapon attachment stripping = true

## Time in seconds before a looting bot is timed out and stops looting
# Setting type: Int32
# Default value: 180
Loot Timeout = 180

## PMC bots will only loot items that exceed the specified value in roubles. When set to 0, bots will ignore the minimum value threshold
# Setting type: Single
# Default value: 12000
PMC: Min loot value threshold = 12000

## PMC bots will NOT loot items that exceed the specified value in roubles. When set to 0, bots will ignore the maximum value threshold
# Setting type: Single
# Default value: 0
PMC: Max loot value threshold = 0

## The equipment a PMC bot is able to equip during raid
# Setting type: CanEquipEquipmentType
# Default value: All
# Acceptable values: Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Earpiece, FaceCover, Eyewear, Armband, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
PMC: Allowed gear to equip = All

## The equipment a PMC bot is able to place in their backpack/rig
# Setting type: EquipmentType
# Default value: Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Dogtag, Earpiece, FaceCover, Eyewear, Armband
# Acceptable values: Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Dogtag, ArmorPlate, Earpiece, FaceCover, Eyewear, Armband, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
PMC: Allowed gear in bags = Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Dogtag, Earpiece, FaceCover, Eyewear, Armband

## All non-PMC bots will only loot items that exceed the specified value in roubles. When set to 0, bots will ignore the minimum value threshold
# Setting type: Single
# Default value: 5000
Scav: Min loot value threshold = 5000

## All non-PMC bots will NOT loot items that exceed the specified value in roubles. When set to 0, bots will ignore the maximum value threshold
# Setting type: Single
# Default value: 0
Scav: Max loot value threshold = 0

## The equipment a non-PMC bot is able to equip during raid
# Setting type: CanEquipEquipmentType
# Default value: All
# Acceptable values: Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Earpiece, FaceCover, Eyewear, Armband, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Scav: Allowed gear to equip = All

## The equipment a non-PMC bot is able to place in their backpack/rig
# Setting type: EquipmentType
# Default value: Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Dogtag, Earpiece, FaceCover, Eyewear, Armband
# Acceptable values: Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Dogtag, ArmorPlate, Earpiece, FaceCover, Eyewear, Armband, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Scav: Allowed gear in bags = Backpack, TacticalRig, ArmoredRig, Chest, Weapon, Grenade, Helmet, Dogtag, Earpiece, FaceCover, Eyewear, Armband

## Enables logs for the item apprasier that calcualtes the weapon values
# Setting type: LogLevel
# Default value: Error
# Acceptable values: None, Error, Warning, Info, Debug, All
# Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)
Debug: Item Appraiser Log Levels = Error

[Performance]

## Limits the amount of bots that are able to simultaneously run looting logic. A value of 0 represents no limit
# Setting type: Int32
# Default value: 20
Maximum looting bots = 20

## Any bot farther than the specified distance in meters will not run any looting logic. A value of 0 represents no limit
# Setting type: Int32
# Default value: 0
Limit looting by distance to player = 0

## Max number of bots that can scan for loot at the same time. Takes effect next raid. A value of 0 represents no limit
# Setting type: Int32
# Default value: 3
# Acceptable value range: From 0 to 35
Maximum concurrent scans = 3